183
edits
RV10 Community Wiki: Difference between revisions
m
→Ordering Kits - Main Items They Contain And Items to Delete
| Line 134: | Line 134: | ||
* The standard order for the kits is: Empennage, Wings, Fuselage, Finishing Kit | * The standard order for the kits is: Empennage, Wings, Fuselage, Finishing Kit | ||
* The empennage kit is traditionally first -- it is fairly cheap and easy | * The empennage kit is traditionally first -- it is fairly cheap and easy | ||
* But you could also start with the wing kit first, or even the fuselage kit (you won't be able to fully finish the fuselage kit without the tailcone, though) | * But you could also start with the wing kit first, or even the fuselage kit (you won't be able to fully finish the fuselage kit without the tailcone (in the Empennage kit), though) | ||
* Consider buying some [https://www.amazon.com/dp/B09GWCJYTV Collision Wrap] prior to receiving your Fuselage kit; it is really impossible to properly inspect the transparencies (rear side windows and windshield) without removing the protective wrap that will be on them. You can remove that wrap, inspect for any scratches or issues, and then install your own Collision Wrap. Being able to remove and replace this wrap will also be helpful while installing the windows. | |||
* The wing kit can be done at almost any time. You won't typically attach the wings until the build is complete, so it's OK to build them early in the process or wait until later. | * The wing kit can be done at almost any time. You won't typically attach the wings until the build is complete, so it's OK to build them early in the process or wait until later. | ||
* If you do the fuselage kit before you have received your wing kit, you will need to buy [[SECTION 28: FWD FUSE RIBS, BHDS & BOTTOM SKIN|temporary wing-mounting bolts]] and you will need to [https://store.vansaircraft.com/w-730-bellcrank-jig-w-730.html buy] or fabricate the [[SECTION 40: FLAP SYSTEM|W-730 template]]. | * If you do the fuselage kit before you have received your wing kit, you will need to buy [[SECTION 28: FWD FUSE RIBS, BHDS & BOTTOM SKIN|temporary wing-mounting bolts]] and you will need to [https://store.vansaircraft.com/w-730-bellcrank-jig-w-730.html buy] or fabricate the [[SECTION 40: FLAP SYSTEM|W-730 template]]. | ||