3,777
edits
SECTION 45: CABIN DOORS & TRANSPARENCIES: Difference between revisions
Jump to navigation
Jump to search
SECTION 45: CABIN DOORS & TRANSPARENCIES (view source)
Revision as of 16:20, 16 August 2025
, 16 August→45-06
m (→General) |
m (→45-06) |
||
| Line 55: | Line 55: | ||
* A bolt is used as hinge pin. Consider grinding down the head a bit if it interferes with the cabin pocket. | * A bolt is used as hinge pin. Consider grinding down the head a bit if it interferes with the cabin pocket. | ||
* A group of builders are working on a hinge cover, see [https://cad.onshape.com/documents/84d0ba8a64dbd86d8aee8ad1/w/ed92d4e493cd33946f3013d2/e/1d170d74353b23aebd0a0215 OnShape CAD project], check fit using this 1:1 print [[Media:Hinge cover v2.pdf| pdf file]] | * A group of builders are working on a hinge cover, see [https://cad.onshape.com/documents/84d0ba8a64dbd86d8aee8ad1/w/ed92d4e493cd33946f3013d2/e/1d170d74353b23aebd0a0215 OnShape CAD project], check fit using this 1:1 print [[Media:Hinge cover v2.pdf| pdf file]] | ||
* The plans provide instructions for fitting the hinges to the LHS door, and Step 3 provides the positions for the WD-1019-L and WD-1019-R hinges. The plans then instruct the builder to 'repeat this step for the right side door hinges'. Note: the WD-1019-L | * The plans provide instructions for fitting the hinges to the LHS door, and Step 3 provides the positions for the WD-1019-L and WD-1019-R hinges. The plans then instruct the builder to 'repeat this step for the right side door hinges'. Note: the WD-1019-L hinges must be placed on the left side, "-R" on the right side if you stand in front of each door and look at it. | ||
* A [[3D-Printed Tools and Parts|3D printable Aalignment jig]] is available to use in lieu of three scrap aluminum spacers. | * A [[3D-Printed Tools and Parts|3D printable Aalignment jig]] is available to use in lieu of three scrap aluminum spacers. | ||
* More than one AN960-10 washer will likely be required on some of the screws in order to get them to tighten up. Add more washers as needed. <br>[[File:WD-1019-L-R Hinges.jpg|300px|Cabin door hinge placement]]<br>See also section 4:<br>[[File:Screen_Shot_2024-04-03_at_8.29.19_AM.png|500px]] | * More than one AN960-10 washer will likely be required on some of the screws in order to get them to tighten up. Add more washers as needed. <br>[[File:WD-1019-L-R Hinges.jpg|300px|Cabin door hinge placement]]<br>See also section 4:<br>[[File:Screen_Shot_2024-04-03_at_8.29.19_AM.png|500px]] | ||