SECTION 45: CABIN DOORS & TRANSPARENCIES: Difference between revisions

SECTION 45: CABIN DOORS & TRANSPARENCIES (view source)

182 bytes added , 30 June

m

3,777

edits

@@ Line 12: / Line 12: @@
 == 45-02 ==
-* The holes in the two door halves don't align, just use the ones that do align, see also this  [https://www.facebook.com/groups/vansrv10/posts/7377429765711392 FB thread] 4/2024.<br>If the bottom 4 holes align nicely, ignore the top two holes.<br>You don't have to mark up the cutting lines for the inner half. After marking up and trimming the outer half, cleco the halves together, then copy the outlines including for the window from the outer half to the inner half.
+* The holes in the two door halves don't align, just use the ones that do align, see also this  [https://www.facebook.com/groups/vansrv10/posts/7377429765711392 FB thread] 4/2024.<br>If the bottom 4 holes align nicely, ignore the top two holes.
+* Don't round off the bottom corners when trimming. Some open holes in the fuselage skin sit in those corners and need to be match drilled with a hole finder or with the split lines.
+* You don't have to mark up the cutting lines for the inner half. After marking up and trimming the outer half, cleco the halves together, then copy the outlines including for the window from the outer half to the inner half.
 == 45-06 ==