SECTION 45: CABIN DOORS & TRANSPARENCIES: Difference between revisions

SECTION 45: CABIN DOORS & TRANSPARENCIES (view source)

175 bytes added , 29 June

m

3,777

edits

@@ Line 5: / Line 5: @@
 == General ==
 * For door options see the page [[Door_Locks_/_Hinges_/_Handles|Door Looks / Hinges / Handles / Seals]].
-* If you are installing the PlaneAround third latch, consider installing the gearbox before bonding the inner and outer door shell, see this [https://www.facebook.com/groups/vansrv10/posts/8964629853658034 FB post]
+* If you are installing the PlaneAround third latch, consider installing the gearbox before bonding the inner and outer door shell, see this [https://www.facebook.com/groups/vansrv10/posts/8964629853658034 FB post]. Advantage is that you don't need a slot at the bottom of the door and up the inside. Disadvantage is potential gear box contamination during the bonding of the door halves.
 * Do not clean adhesive residue off the windows with anything but mineral spirits. Do not clean with concentrated alcohol. The exact instructions can be found [https://www.airplaneplastics.com/faq here].
 * Door fit: See this [https://vansairforce.net/community/showthread.php?t=191460 VAF Thread]<br>and this [https://www.facebook.com/groups/vansrv10/posts/3229350953852648 FB post]<br> and this [https://www.facebook.com/groups/vansrv10/posts/3896153890505681 FB post]<br> and this [https://www.facebook.com/groups/vansrv10/posts/8361445567309802 FB post]<br> and this [https://www.facebook.com/groups/vansrv10/posts/9519695101484837 FB post]