3,763
edits
SECTION 12: EMPENNAGE FAIRINGS: Difference between revisions
m
no edit summary
mNo edit summary |
mNo edit summary |
||
| Line 20: | Line 20: | ||
==== Page 12-3 ==== | ==== Page 12-3 ==== | ||
* It is possible to 3D-print a mold and lay up a fiberglass cap that goes onto the leading edge of E-912 instead of building it up to match the curvature of E-913. The 3D-print project is here [https://cad.onshape.com/documents/2d18e62c34f9871d62d595bd/w/62ed52794e9db993635c4b5a/e/878ad7f4480a4767bfe7c195?renderMode=0&uiState=6243a8118871e6462234511d at Onshape]. The 3D-printer file is here [[ | * It is possible to 3D-print a mold and lay up a fiberglass cap that goes onto the leading edge of E-912 instead of building it up to match the curvature of E-913. The 3D-print project is here [https://cad.onshape.com/documents/2d18e62c34f9871d62d595bd/w/62ed52794e9db993635c4b5a/e/878ad7f4480a4767bfe7c195?renderMode=0&uiState=6243a8118871e6462234511d at Onshape]. The 3D-printer file is here [[Media:HS Fairing Mold1.stl|HS_Fairing_Mold1.stl]]. | ||
* It is possible to 3D-print a mold and lay up a fiberglass insert that goes into HS-910. It has the right curvature and it has the necessary kink to match the Elevator counter weight leading edge. The 3D-print project is here [https://cad.onshape.com/documents/fcd78f2ce5fcf8549652b724/w/efce270e7d34aa85633c27ce/e/b25eb27fde3cd5777347d51f?renderMode=0&uiState=6243a8b37aa9182ef0561832 at Onshape]. The 3D-printer file is here [[ | * It is possible to 3D-print a mold and lay up a fiberglass insert that goes into HS-910. It has the right curvature and it has the necessary kink to match the Elevator counter weight leading edge. The 3D-print project is here [https://cad.onshape.com/documents/fcd78f2ce5fcf8549652b724/w/efce270e7d34aa85633c27ce/e/b25eb27fde3cd5777347d51f?renderMode=0&uiState=6243a8b37aa9182ef0561832 at Onshape]. The 3D-printer file is here [[Media:HS Fairing Mold2.stl|HS_Fairing_Mold2.stl]] | ||
==== Page 12-6 ==== | ==== Page 12-6 ==== | ||
* Step 6: There is no machine countersink bit with a pilot that would fit exactly into the threaded part of a #6 screw (#36 hole), only for the #28 hole that the screw goes through. Use the countersink bit for 3/32 rivets (#40). | * Step 6: There is no machine countersink bit with a pilot that would fit exactly into the threaded part of a #6 screw (#36 hole), only for the #28 hole that the screw goes through. Use the countersink bit for 3/32 rivets (#40). | ||
[[ | [[Category:Hints]] | ||