25
edits
SECTION 29: FUSE SIDE SKINS: Difference between revisions
Jump to navigation
Jump to search
→29-17
m (→29-18) |
(→29-17) |
||
| Line 113: | Line 113: | ||
== 29-17 == | == 29-17 == | ||
* Some of the holes around the door opening are left open. You will cleco the door to the frame using those in order to 1) get the correct position of the door within the insert and 2) lock in the airframe shape into the door when bonding the door shells together. These blanks allow you a place to insert the clecos to hold it. Once the doors are bonded and door install complete, you then rivet those remaining. See also this [https://www.facebook.com/groups/vansrv10/posts/9301782943276055 FB thread]. | * Some of the holes around the door opening are left open. You will cleco the door to the frame using those in order to 1) get the correct position of the door within the insert and 2) lock in the airframe shape into the door when bonding the door shells together. These blanks allow you a place to insert the clecos to hold it. Once the doors are bonded and door install complete, you then rivet those remaining. See also this [https://www.facebook.com/groups/vansrv10/posts/9301782943276055 FB thread]. | ||
* Assuming you are not considering installing wiring under the rear floors (you shouldn't), you might consider installing the rear floor pans now before the side skins are installed, while it is easier to get access. See page 35-2. | |||
== 29-18 == | == 29-18 == | ||