3,777
edits
SECTION 29: FUSE SIDE SKINS: Difference between revisions
Jump to navigation
Jump to search
m
→29-18
(→29-14) |
m (→29-18) |
||
| Line 110: | Line 110: | ||
== 29-16 == | == 29-16 == | ||
* Step 5: The most forward rivet on the bottom part of the lower firewall bracket is hard to reach. Some trim the top flange of the bracket to allow for using an offset rivet set, others use a large 16" Knipex pair of pliers with a makeshift die for the manufactured head. See this [https://www.facebook.com/groups/vansrv10/posts/8092829177504777 FB thread].<br>[[File:Screenshot 2024-09-13 at 8.27.25 AM.png|300x300px]] | * Step 5: The most forward rivet on the bottom part of the lower firewall bracket is hard to reach. Some trim the top flange of the bracket to allow for using an offset rivet set, others use a large 16" Knipex pair of pliers with a makeshift die for the manufactured head. See this [https://www.facebook.com/groups/vansrv10/posts/8092829177504777 FB thread].<br>[[File:Screenshot 2024-09-13 at 8.27.25 AM.png|300x300px]] | ||
== 29-17 == | |||
* Some of the holes around the door opening are left open. You will cleco the door to the frame using those in order to 1) get the correct position of the door within the insert and 2) lock in the airframe shape into the door when bonding the door shells together. These blanks allow you a place to insert the clecos to hold it. Once the doors are bonded and door install complete, you then rivet those remaining. See also this [https://www.facebook.com/groups/vansrv10/posts/9301782943276055 FB thread]. | |||
== 29-18 == | == 29-18 == | ||