9
edits
SECTION 26: MID FUSE RIBS & BOTTOM SKINS: Difference between revisions
SECTION 26: MID FUSE RIBS & BOTTOM SKINS (view source)
Revision as of 17:04, 21 March 2022
, 21 March 2022Created page with "==PAGE 26-5 == Consider at this point whether you need access holes in the F-1017 under-seat ribs for conduit and/or antenna wiring. Many builders cut holes in the F-1017 ribs for conduit passthroughs. These holes will be much easier to cut at this point. Also consider marking and cutting/installing antenna doublers on the bottom skins in this general section. This will be much easier now than later, when the seat plates are permanently riveted in place."
(Created page with "==PAGE 26-5 == Consider at this point whether you need access holes in the F-1017 under-seat ribs for conduit and/or antenna wiring. Many builders cut holes in the F-1017 ribs for conduit passthroughs. These holes will be much easier to cut at this point. Also consider marking and cutting/installing antenna doublers on the bottom skins in this general section. This will be much easier now than later, when the seat plates are permanently riveted in place.") |
(No difference)
|