7
edits
SECTION 26: MID FUSE RIBS & BOTTOM SKINS: Difference between revisions
Jump to navigation
Jump to search
SECTION 26: MID FUSE RIBS & BOTTOM SKINS (view source)
Revision as of 12:28, 25 March 2022
, 25 March 2022→PAGE 26-5
(Created page with "==PAGE 26-5 == Consider at this point whether you need access holes in the F-1017 under-seat ribs for conduit and/or antenna wiring. Many builders cut holes in the F-1017 ribs for conduit passthroughs. These holes will be much easier to cut at this point. Also consider marking and cutting/installing antenna doublers on the bottom skins in this general section. This will be much easier now than later, when the seat plates are permanently riveted in place.") |
|||
| Line 4: | Line 4: | ||
Also consider marking and cutting/installing antenna doublers on the bottom skins in this general section. This will be much easier now than later, when the seat plates are permanently riveted in place. | Also consider marking and cutting/installing antenna doublers on the bottom skins in this general section. This will be much easier now than later, when the seat plates are permanently riveted in place. | ||
If you haven't updated your plans in a while, ensure you dimple the #40 holes in the web of F-1015A. There was a revision on page 26-5 in July of 2021 that added this step. | |||