3,763
edits
Hints for installing TS Flightline hoses: Difference between revisions
Hints for installing TS Flightline hoses (view source)
Revision as of 23:41, 21 January 2024
, 21 January 2024no edit summary
mNo edit summary Tags: Mobile edit Mobile web edit |
mNo edit summary Tags: Mobile edit Mobile web edit |
||
| Line 5: | Line 5: | ||
* Each hose has a tag crimped on with VERY sharp edges where they cut the tab off. Consider using a glue gun and adding hot glue to the tabs so you don't cut yourself handling the hoses during install. Make sure the tags are not near anything they can touch later during flight and cut into. | * Each hose has a tag crimped on with VERY sharp edges where they cut the tab off. Consider using a glue gun and adding hot glue to the tabs so you don't cut yourself handling the hoses during install. Make sure the tags are not near anything they can touch later during flight and cut into. | ||
* The tags have a hose number stamped onto it, e.g. "H9" (Hose 9). The kit contains a small paper sheet that lists the function of each fuel hose number. | * The tags have a hose number stamped onto it, e.g. "H9" (Hose 9). The kit contains a small paper sheet that lists the function of each fuel hose number. | ||
* If you jumped ahead and installed the front seat floors and the seat rails, they need to come off to properly torque the fittings and fuel lines. Also install the control column and the side panels before assembling the front seat floors/rails. | |||
* Consider installing the control column temporarily to check interference with the fuel hoses. | |||
==== Fuel Lines ==== | ==== Fuel Lines ==== | ||