3,777
edits
SECTION 49: SEATS & SEAT BELTS: Difference between revisions
m
→49-3
mNo edit summary |
m (→49-3) |
||
| Line 8: | Line 8: | ||
== 49-3 == | == 49-3 == | ||
* Note: The outer seat rails are blocking the assembly of the F-1015D mid cabin side covers since they are inserted on the upper end first, then rotate down. For this reason, the outer rails shouldn't be finally assembled before the cabling is done. | |||
* Modification so seat comes out easily<br>Note: the seats come with a label that warns not to modify the seat in any way. This is not a recommendation to do so.<br>Note: Nutplates are used mostly with fully threaded bolts for non-structural purposes. If you use nutplates with non fully threaded bolts, care needs to go into determining the correct bolt length / washers to avoid bottoming out or having threads show inside the hole. Best to check before mounting the nutplates. | * Modification so seat comes out easily<br>Note: the seats come with a label that warns not to modify the seat in any way. This is not a recommendation to do so.<br>Note: Nutplates are used mostly with fully threaded bolts for non-structural purposes. If you use nutplates with non fully threaded bolts, care needs to go into determining the correct bolt length / washers to avoid bottoming out or having threads show inside the hole. Best to check before mounting the nutplates. | ||
** There are two ways to remove the seat, consider making one of the two mods (they save time, nothing more): | ** There are two ways to remove the seat, consider making one of the two mods (they save time, nothing more): | ||