3,777
edits
SECTION 46: ENGINE MOUNT & LANDING GEAR: Difference between revisions
SECTION 46: ENGINE MOUNT & LANDING GEAR (view source)
Revision as of 16:18, 29 April 2023
, 29 April 2023→Page 46-02
m (→Page 46-02) |
m (→Page 46-02) |
||
| Line 18: | Line 18: | ||
** 3/16 (0.1875) original hole | ** 3/16 (0.1875) original hole | ||
** 5/8 (0.3125) Note: a 1/4 drill bit will bind / break off, better to do larger steps | ** 5/8 (0.3125) Note: a 1/4 drill bit will bind / break off, better to do larger steps | ||
** 23/64 (0.359375) | ** 23/64 (0.359375) Note: recommended hole size for reamer to finish up | ||
** 3/8 reamer (0.375), e.g. [https://www.amazon.com/dp/B076DMH4BF at Amazon] | ** 3/8 reamer (0.375), e.g. [https://www.amazon.com/dp/B076DMH4BF at Amazon] | ||
* Note: Don't waste the single-use metal stop nuts yet, instead use AN6 castle nuts or 3/8-24 hardware store nuts for the drill process. | * Note: Don't waste the single-use metal stop nuts yet, instead use AN6 castle nuts or 3/8-24 hardware store nuts for the drill process. | ||