3,777
edits
SECTION 27: FIREWALL: Difference between revisions
Jump to navigation
Jump to search
m
→PAGE 27-2
mNo edit summary |
m (→PAGE 27-2) |
||
| Line 4: | Line 4: | ||
== PAGE 27-2 == | == PAGE 27-2 == | ||
* For additional info, see also section [[QB_Fuselage]] | * For additional info on the firewall in general, see also section [[QB_Fuselage]] | ||
* Plan your control cables pass-throughs at step 3 | * Plan your control cables pass-throughs at step 3 | ||
* Some people have used an "eyeball" type here that may require different spacing than the pre-punched holes provided in the kit.<br>Many use these for the control cable penetrations (at Spruce: [https://www.aircraftspruce.com/catalog/appages/eyeballfw2.php EYEBALL FIREWALL FITTING- SS PRESSURE PLATE - STEEL TTP]):<br>[[File:Eyeball Pass-thru.png]]<br>More products, including double cable models are here: http://www.doubleteeproducts.com/doubleteefirewallproducts/ | * Some people have used an "eyeball" type here that may require different spacing than the pre-punched holes provided in the kit.<br>Many use these for the control cable penetrations (at Spruce: [https://www.aircraftspruce.com/catalog/appages/eyeballfw2.php EYEBALL FIREWALL FITTING- SS PRESSURE PLATE - STEEL TTP]):<br>[[File:Eyeball Pass-thru.png]]<br>More products, including double cable models are here: http://www.doubleteeproducts.com/doubleteefirewallproducts/ | ||
* Look ahead in the plans to see if you want to do the double plastic bushing. The RV-14 kit uses an FF-00001 to penetrate the firewall:<br>[[File:Ff-00001.png|659x659px]] | * Look ahead in the plans to see if you want to do the double plastic bushing. The RV-14 kit uses an FF-00001 to penetrate the firewall:<br>[[File:Ff-00001.png|659x659px]] | ||
* Many people have used the following pass-thru with the RV-10 (at Spruce: [https://www.aircraftspruce.com/catalog/hapages/ssfirewallkit12-04762.php?clickkey=5015617 Avery SS Firewall Pass-Thru]):<br>[[File:Avery SS Pass-Thru.png|304x304px]] | * Many people have used the following pass-thru with the RV-10 (at Spruce: [https://www.aircraftspruce.com/catalog/hapages/ssfirewallkit12-04762.php?clickkey=5015617 Avery SS Firewall Pass-Thru]):<br>[[File:Avery SS Pass-Thru.png|304x304px]] | ||
==== Step ==== | |||
* Several builders are reporting part WD-1002-L-PC / WD-1002-R-PC being labelled crossed. If you ended with two of the same kind, Vans will be happy to swap them out. | |||
==== Step 7 ==== | ==== Step 7 ==== | ||
Note when riveting F-1001M Left Side Angle, you need to leave the 2 holes that intersect the Oil Cooler Box Attach Holes open so that they can be used to attach the oil cooler in Section FF1-2 | *Note when riveting F-1001M Left Side Angle, you need to leave the 2 holes that intersect the Oil Cooler Box Attach Holes open so that they can be used to attach the oil cooler in Section FF1-2 | ||
== PAGE 27-3 == | == PAGE 27-3 == | ||