3,777
edits
Airflow Systems: Difference between revisions
Jump to navigation
Jump to search
m
no edit summary
mNo edit summary |
mNo edit summary |
||
| Line 34: | Line 34: | ||
*One needs a 2.5 inch hole saw to drill the hole for the dryer. Missing in the list of tools needed for installation. | *One needs a 2.5 inch hole saw to drill the hole for the dryer. Missing in the list of tools needed for installation. | ||
*The manual shows a 90 degree fitting for the dryer with service port however the kit contains a 90 degree fitting without a port and a straight hose coupling with port. None of the drawings or pictures show this new variation. See also this [https://www.facebook.com/groups/249625742733962/posts/692509681778897 FB thread]. The kit now assumes, you mount the new inline service port at the front edge of the shelf wherever convenient. | *The manual shows a 90 degree fitting for the dryer with service port however the kit contains a 90 degree fitting without a port and a straight hose coupling with port. None of the drawings or pictures show this new variation. See also this [https://www.facebook.com/groups/249625742733962/posts/692509681778897 FB thread]. The kit now assumes, you mount the new inline service port at the front edge of the shelf wherever convenient. | ||
* The manual says nothing about doublers for the condenser holes, but the kit includes doublers. The holes in the doublers are a bit too small, the 90 degree fittings won't pass through. The doublers can be riveted to the inside of the bottom skin using 4 AN470 4-4 rivets.<br>[[File:2022-10-29 18-38-22.jpg|400x400px]] | * In order to mark the two holes for the condenser fittings one needs to make a template. A good way is to first make very large holes roughly where they need to be, then pass the fittings through those holes (make sure they are perpendicular to the condenser), then take additional snippets that have half-hole cutouts at their edges and tape them to the template so the half-holes touch the fitting. | ||
*The manual says nothing about doublers for the condenser holes, but the kit includes doublers. The holes in the doublers are a bit too small, the 90 degree fittings won't pass through. The doublers can be riveted to the inside of the bottom skin using 4 AN470 4-4 rivets.<br>[[File:2022-10-29 18-38-22.jpg|400x400px]] | |||