3,825
edits
Aerosport Hints: Difference between revisions
m
→Panel
m (→Panel) |
m (→Panel) |
||
| Line 8: | Line 8: | ||
* If you are installing Garmin GDUs you probably just need to trim the carbon fiber to fit the installation bracket but not the aluminum frame -- if you attach the bracket to the back of the panel inserts, it will roughly end up at the level of the carbon fiber but not as deep as the aluminum frame. The exception is the corners where the nutplates are located. | * If you are installing Garmin GDUs you probably just need to trim the carbon fiber to fit the installation bracket but not the aluminum frame -- if you attach the bracket to the back of the panel inserts, it will roughly end up at the level of the carbon fiber but not as deep as the aluminum frame. The exception is the corners where the nutplates are located. | ||
* You will probably be creating/using three insert panels (left, center, right) and will have to cut out the carbon fiber for those. For the center panel, you will probably need nutplates attached to the carbon fiber for the insert panel. But for the left/right panels, the nutplates will probably need to be installed on the aluminum support frame since the carbon fiber sits flush with that. | * You will probably be creating/using three insert panels (left, center, right) and will have to cut out the carbon fiber for those. For the center panel, you will probably need nutplates attached to the carbon fiber for the insert panel. But for the left/right panels, the nutplates will probably need to be installed on the aluminum support frame since the carbon fiber sits flush with that. | ||
* For an issue with the initial alignment of the 310 panel, see this [https://www.facebook.com/groups/ | * For an issue with the initial alignment of the 310 panel, see this [https://www.facebook.com/groups/vansrv10/posts/24943767405317690/ FB post]. | ||
==== Front side panels ==== | ==== Front side panels ==== | ||