186
edits
SECTION 43: CABIN COVER: Difference between revisions
Jump to navigation
Jump to search
Added info about Aerosport carbon fiber door sills
(→Hints) |
(Added info about Aerosport carbon fiber door sills) |
||
| Line 19: | Line 19: | ||
* Some people run conduit for wires up the pillars on either side of the windscreen -- you'll want to do that before permanently attaching the cabin top (other people just run wires up the center support bar instead) | * Some people run conduit for wires up the pillars on either side of the windscreen -- you'll want to do that before permanently attaching the cabin top (other people just run wires up the center support bar instead) | ||
* If installing an [https://www.aerosportproducts.com/product/rv-10-carbon-fiber-overhead-console/ AeroSport Overhead Console] it will be easier to fit and attach it before attaching the cabin top | * If installing an [https://www.aerosportproducts.com/product/rv-10-carbon-fiber-overhead-console/ AeroSport Overhead Console] it will be easier to fit and attach it before attaching the cabin top | ||
* If interested in the [https://www.aerosportproducts.com/product/rv-10-door-sill-cap/ Aerosport Carbon Fiber Door Sills] now is a good time to order those. | |||
=== Resources === | === Resources === | ||
| Line 91: | Line 92: | ||
* Step 1 | * Step 1 | ||
** On the forward door post, the longer 10R14 bolts go into the 3 upper holes, the shorter 10R11 ones go into the lower 5 holes. | ** On the forward door post, the longer 10R14 bolts go into the 3 upper holes, the shorter 10R11 ones go into the lower 5 holes. | ||
* Step 2 | |||
** If using the Aerosport Carbon Fiber Door Sills, consider installing them before doing this step. Trim them and put them into place, with the cut edge fitting under the radius where the cabin top sits on the door sill. Then apply the epoxy/filler as directed, permanently attaching the carbon fiber and covering the cut edge. | |||
[[index.php?title=Category:Hints]] | [[index.php?title=Category:Hints]] | ||