3,777
edits
Aerosport Hints: Difference between revisions
m
no edit summary
mNo edit summary |
mNo edit summary |
||
| Line 67: | Line 67: | ||
*** Assemble everything, find the sweet spot for the extension to not be under tension and mark the armrest mounting holes using a hole finder. Check the length of the extension. It should have a tiny bit of slack up and down. Trim it a bit if under tension.<br>[[File:2023-07-15 19-58-09.jpg|400x400px]]<br>Test fit the placement with the extension in place. | *** Assemble everything, find the sweet spot for the extension to not be under tension and mark the armrest mounting holes using a hole finder. Check the length of the extension. It should have a tiny bit of slack up and down. Trim it a bit if under tension.<br>[[File:2023-07-15 19-58-09.jpg|400x400px]]<br>Test fit the placement with the extension in place. | ||
***Drill a 7/64 hole for the slotted spring pin through the valve end of the extension using the two holes of the valve fitting as a guide. Insert the pin with a hammer to secure the extension to the valve. | ***Drill a 7/64 hole for the slotted spring pin through the valve end of the extension using the two holes of the valve fitting as a guide. Insert the pin with a hammer to secure the extension to the valve. | ||
*** If you have the stock panel, consider closing off the front end of the armrest with a 3D-printed part, see [https://www.facebook.com/groups/vansrv10/posts/9137836466337371 | *** If you have the stock panel, consider closing off the front end of the armrest with a 3D-printed part, see this [https://www.facebook.com/groups/vansrv10/posts/9137836466337371 FB post]. | ||
[[Category:Optional]] | [[Category:Optional]] | ||