Matco installation recommendations: Difference between revisions

Matco installation recommendations (view source)

59 bytes added , 25 April

m

no edit summary

3,777

edits

@@ Line 3: / Line 3: @@
 * Viton o-ring for the RV-10 Matco brake kit:
 ** AS568-218: https://www.theoringstore.com/store/index.php?main_page=product_info&products_id=6821
-*** Specifically for WHLWI600XLT-2 (and variations). Verify o-ring size as your setup may differ.
+*** Specifically for main gear wheel kits with order number WHLWI600XLT-2 (and variations): verify the o-ring size as your setup may differ.
-*** Be sure you are getting the o-ring with temp ranges at least -40F - 350F.
+*** Be sure you are getting the o-ring with temp ranges of at least -40F - 350F.
 * Flex gear leg brake lines:
 ** Aircraft Specialty: https://www.aircraftspecialty.com/rv10products.html (gear-leg only hoses are available by special order)
@@ Line 18: / Line 18: @@
-When changing between 5606 and 83282, you must take care to thoroughly flush the 5606 out of the system.  A very small amount of contamination from 5606 in the 83282 dramatically alters the higher flashpoint of 83282.  Drain the system and flush with 83282 and drain again.  The refill with fresh 83282.
+When changing break fluid between 5606 and 83282, you must take care to thoroughly flush the 5606 out of the system.  A very small amount of contamination from 5606 in the 83282 dramatically alters the higher flashpoint of 83282.  Drain the system and flush with 83282 and drain again.  Then refill with fresh 83282.