3,777
edits
SECTION 43: CABIN COVER: Difference between revisions
Jump to navigation
Jump to search
m
→Page 43-8 Center Strut and Windscreen
| Line 52: | Line 52: | ||
** The distance between the longeron and the upper edge of the outside skin is not necessarily 3/4 inches at all places. Measure and correct for your build. The scribe lines that Vans puts on the side lines are not correct (up to ~ 1 inch). Since the longeron is not necessarily parallel to the upper edge of the side skin, it's better to use the upper edge of the side skin and the upper end of the joggle on the cabin top as the two edges that need to match.<br>[[File:2024-04-24 19-38-00.jpg|300x300px]]<br>The joggle is nominally 3/4 inch but will depend on the longeron to side skin top edge distance.<br>[[File:2024-04-24 19-37-26.jpg|300x300px]]<br>Squaring the joggle step with a dremel set to 0.75 inches and the joggle depth. | ** The distance between the longeron and the upper edge of the outside skin is not necessarily 3/4 inches at all places. Measure and correct for your build. The scribe lines that Vans puts on the side lines are not correct (up to ~ 1 inch). Since the longeron is not necessarily parallel to the upper edge of the side skin, it's better to use the upper edge of the side skin and the upper end of the joggle on the cabin top as the two edges that need to match.<br>[[File:2024-04-24 19-38-00.jpg|300x300px]]<br>The joggle is nominally 3/4 inch but will depend on the longeron to side skin top edge distance.<br>[[File:2024-04-24 19-37-26.jpg|300x300px]]<br>Squaring the joggle step with a dremel set to 0.75 inches and the joggle depth. | ||
==== Page 43-8 Center Strut and Windscreen ==== | ==== Page 43-8 Center Strut and Windscreen ==== | ||
* The strut's forward holes into the cabin top might be close to the edge, see this [https://www.facebook.com/groups/vansrv10/posts/8938091872978499 FB thread] | |||
* Step 2 | * Step 2 | ||
** Note: The center rivet line on the F-1071 Forward Top skin is NOT center to the airplane! It is offset along with the F-1044A forward fuselage rib and the top center screw of the instrument panel. The center strut is attached to the rib's side. | ** Note: The center rivet line on the F-1071 Forward Top skin is NOT center to the airplane! It is offset along with the F-1044A forward fuselage rib and the top center screw of the instrument panel. The center strut is attached to the rib's side. | ||