3,777
edits
Current Sensors: Difference between revisions
m
no edit summary
mNo edit summary |
mNo edit summary |
||
| Line 11: | Line 11: | ||
Crimper | Crimper | ||
* [https://www.digikey.com/en/products/detail/adafruit-industries-llc/1213/8258462 Adafruit SN-28B Crimper] (use smallest diameter opening, floor of pin gets pushed in, lugs bend and fold when pushed into upper part) | * [https://www.digikey.com/en/products/detail/adafruit-industries-llc/1213/8258462 Adafruit SN-28B Crimper] (use smallest diameter opening, floor of pin gets pushed in, lugs bend and fold when pushed into upper part) | ||
Pins | |||
* 1 (inner): 5V | |||
* 2 (middle): GND | |||
* 3 (outer): Output, 15 mV / Amp (1.59V @ 100A) | |||
Mounting | Mounting | ||
* Some have made 3D-printed holders for the current sensor, check the links on the [[3D-Printed_Tools_and_Parts]] page. You can also use a size 24 Adel clamp (e.g.[https://www.aircraftspruce.com/catalog/pnpages/MS21919-DG24.php at Spruce]). | * Some have made 3D-printed holders for the current sensor, check the links on the [[3D-Printed_Tools_and_Parts]] page. You can also use a size 24 Adel clamp (e.g.[https://www.aircraftspruce.com/catalog/pnpages/MS21919-DG24.php at Spruce]). | ||