3,777
edits
SECTION 32: TAILCONE ATTACHMENT: Difference between revisions
Jump to navigation
Jump to search
no edit summary
No edit summary |
No edit summary |
||
| Line 9: | Line 9: | ||
* Use two thin strips of aluminum (3/4 inch wide) in the bottom corner sections to guide the tabs of the tailcone to go inside the fuselage skin. | * Use two thin strips of aluminum (3/4 inch wide) in the bottom corner sections to guide the tabs of the tailcone to go inside the fuselage skin. | ||
* Use an inflated 20 inch truck inner tube underneath the fuselage center to lift the fuselage slightly, allowing a swivel motion within the fuselage cradle constraints e.g. [https://www.amazon.com/dp/B00S8GO75M at Amazon] | * Use an inflated 20 inch truck inner tube underneath the fuselage center to lift the fuselage slightly, allowing a swivel motion within the fuselage cradle constraints e.g. [https://www.amazon.com/dp/B00S8GO75M at Amazon] | ||
* This is going to be the first section where you will be happy to have a creeper to get underneath the fuselage, e.g. [https://www.harborfreight.com/premium-adj-headrest-creeper-blk-58865.html this one at HF]. | |||