3,777
edits
SECTION 46: ENGINE MOUNT & LANDING GEAR: Difference between revisions
SECTION 46: ENGINE MOUNT & LANDING GEAR (view source)
Revision as of 03:11, 24 October 2024
, 24 October 2024→Page 46-02
m (→Page 46-06) |
m (→Page 46-02) |
||
| Line 25: | Line 25: | ||
* Note: Some of the 1/2 inch attachment tubes of the engine mount have reduced diameter spots inside from welding. The bushings may bind there. You might have to grind the bushing. | * Note: Some of the 1/2 inch attachment tubes of the engine mount have reduced diameter spots inside from welding. The bushings may bind there. You might have to grind the bushing. | ||
* Note: If you have issues getting the fuel hose out of the hole, use a hook or awl and pierce the hose and pull out. If you have issues getting the nylon bushings out, consider using a screw extractor, e.g. [https://www.amazon.com/gp/product/B09W5PW588 Screw Extractor Set] | * Note: If you have issues getting the fuel hose out of the hole, use a hook or awl and pierce the hose and pull out. If you have issues getting the nylon bushings out, consider using a screw extractor, e.g. [https://www.amazon.com/gp/product/B09W5PW588 Screw Extractor Set] | ||
* Note: Washer-00017 is raw steel and will corrode if not coated or greased. | |||
====Page 46-04==== | ====Page 46-04==== | ||