9
edits
SECTION 25: MID FUSE BULKHEADS: Difference between revisions
Created page with "==PAGE 25-1== ==PAGE 25-2== ==PAGE 25-3== === F-1004C-L and F1004C-R === Step 8 details the assembly of the bulkheads to the center section prior to deburring and priming these parts. Now is a very good time to consider whether you will need additional pass-through holes in the bulkheads for items like conduit, pitot, static, and AoA sensor tubing, air conditioning lines, and other electrical circuits. Many builders find that the two holes referenced here and on PAGE..."
(Created page with "==PAGE 25-1== ==PAGE 25-2== ==PAGE 25-3== === F-1004C-L and F1004C-R === Step 8 details the assembly of the bulkheads to the center section prior to deburring and priming these parts. Now is a very good time to consider whether you will need additional pass-through holes in the bulkheads for items like conduit, pitot, static, and AoA sensor tubing, air conditioning lines, and other electrical circuits. Many builders find that the two holes referenced here and on PAGE...") |
(No difference)
|