SECTION 9: ELEVATORS: Difference between revisions

SECTION 9: ELEVATORS (view source)

34 bytes removed , 18 March 2024

m

3,763

edits

@@ Line 9: / Line 9: @@
 ==== Page 9-7 ====
-* Step 4: Some builders prefer CNC machined cable anchor brackets (WD-415) over the welded ones that come with the kit (Vans did have issues with the first version of them since they only had a weld on one side of the nut). Do your research before ordering a set from iflyrv10.com. You might never receive anything. See [https://www.facebook.com/groups/vansrv10/posts/7196160973838273 this FB post].<br>Consider using fasteners instead of rivets to attach WD-415. If they are riveted, you need to rotate the entire access cover to adjust the length. It's possible, but it takes to move the F-1095A trim mount bracket all the way aft to have enough cable sticking out.
+* Step 4: Some builders prefer CNC machined cable anchor brackets (WD-415) over the welded ones that come with the kit (Vans did have issues with the first version of them since they only had a weld on one side of the nut). Do your research before ordering a set from iflyrv10.com. See [https://www.facebook.com/groups/vansrv10/posts/7196160973838273 this FB post].<br>Consider using fasteners instead of rivets to attach WD-415. If they are riveted, you need to rotate the entire access cover to adjust the length. It's possible, but it takes to move the F-1095A trim mount bracket all the way aft to have enough cable sticking out.
 ----
 Dave Corwith: