SECTION 39: CONTROL SYSTEM: Difference between revisions

* Step 3: If you install an Aerosport 310 panel, you probably will have interference between the grip and the panel. Also, if you opted to let the elevator travel reach its maximum angle of 25 degrees down (only 20 down is required, see first flight section), even the stock panel might interfere with a grip (especially the Tosten 8 button since it is tilted forward).<br>To fix the grip interference, a lot of builders bend the control stick with e.g. a hydraulic HF tube bender (don't forget to fill the tube with sand). However, then, the elevator all up position might interfere with the pilot / passenger with the seats in the front 3 notches, especially, if you opted to let the elevator travel reach its maximum angle of 30 degrees up (only 25 up is required). See also this [https://www.facebook.com/groups/vansrv10/posts/4322058277915238 FB thread from 2021] and this [https://www.facebook.com/groups/vansrv10/posts/6769828743138167 FB thread from 2023.<br>[[File:Screen Shot 2024-03-12 at 7.46.35 AM.png|300x300px]]<br>Tosten supplies a 5 degree tilt adapter on request that moves the top of the stick about 0.5 inches back. If you want to reach larger tilt angles, see this [https://www.facebook.com/groups/vansrv10/posts/7107824319338606] FB thread that refers to a 22.7 degree [https://cad.onshape.com/documents/e3c6c2af5a7c15a30cca2d9d/w/3c4894569a1b3b37534c99c5/e/b8cecdb7397c155bd10b12e5?renderMode=0&uiState=65f0676bc5144567a3afc4d2 adapter design].<br>[[File:2024-03-11 20-12-02.jpeg|400x400px]]