3,777
edits
SECTION 39: CONTROL SYSTEM: Difference between revisions
Jump to navigation
Jump to search
m
→Page 39-2
m (→Page 39-2) |
m (→Page 39-2) |
||
| Line 17: | Line 17: | ||
** Hint for Onshape users: You can import a pdf page via Inkscape. Import the pdf page in Inkscape and save it out as dxf v14 file. Import that dxf file into Onshape. Start a new sketch. Add the dxf drawing to the sketch. Take a known distance between two points and call out a dimension between them. It will show the distance as it imported the drawing. You can now override that distance to the known distance and the whole dxf is now at scale. You can now overlay your own drawing while the endpoints will snap to the dxf points. Next, create a drawing within Onshape and add the sketch. You can then export that drawing back to a pdf and the scale is correct. | ** Hint for Onshape users: You can import a pdf page via Inkscape. Import the pdf page in Inkscape and save it out as dxf v14 file. Import that dxf file into Onshape. Start a new sketch. Add the dxf drawing to the sketch. Take a known distance between two points and call out a dimension between them. It will show the distance as it imported the drawing. You can now override that distance to the known distance and the whole dxf is now at scale. You can now overlay your own drawing while the endpoints will snap to the dxf points. Next, create a drawing within Onshape and add the sketch. You can then export that drawing back to a pdf and the scale is correct. | ||
==== Page 39-3 ==== | |||
** Step 2: You need two holes that are opposed to each other and aligned so you can get a straight safety wire through later. | |||
[[Category:Hints]] | [[Category:Hints]] | ||