3,763
edits
Hints for installing TS Flightline hoses: Difference between revisions
Hints for installing TS Flightline hoses (view source)
Revision as of 16:04, 4 January 2024
, 4 January 2024→Brake Lines
m (→Brake Lines) |
m (→Brake Lines) |
||
| Line 28: | Line 28: | ||
* The brake line with the 90 degree fitting goes to the left side of the T-fitting that is attached to the brake fluid reservoir (copilot left pedal). | * The brake line with the 90 degree fitting goes to the left side of the T-fitting that is attached to the brake fluid reservoir (copilot left pedal). | ||
* The brake lines under the seats are held by F-1084A/F-1084B. Normally the metal lines are protected by plastic bushings with .25 ID / .375 OD. For the premade lines, one can use rubber grommets forced over the fitting, e.g. ID 0.375 (3/8), OD .469 (15/32). This requires enlarging the F-1084 holes to 15/32. | * The brake lines under the seats are held by F-1084A/F-1084B. Normally the metal lines are protected by plastic bushings with .25 ID / .375 OD. For the premade lines, one can use rubber grommets forced over the fitting, e.g. ID 0.375 (3/8), OD .469 (15/32). This requires enlarging the F-1084 holes to 15/32. | ||
* The brake lines under the seats are going to the aftmost hole instead of the center hole if you need a return line. | |||