3,763
edits
SECTION 8: HORIZONTAL STABILIZER: Difference between revisions
SECTION 8: HORIZONTAL STABILIZER (view source)
Revision as of 10:33, 23 November 2023
, 23 November 2023no edit summary
mNo edit summary |
|||
| Line 9: | Line 9: | ||
* Step 3: only cut back the two corners on the front edge of the nose rib, not the entire edge because then you will violate the edge distance for the foremost rivet. See also this [https://www.facebook.com/groups/vansrv10/posts/5918655041588879 FB thread]. | * Step 3: only cut back the two corners on the front edge of the nose rib, not the entire edge because then you will violate the edge distance for the foremost rivet. See also this [https://www.facebook.com/groups/vansrv10/posts/5918655041588879 FB thread]. | ||
* Step 4: Very likely that the nose rib that came with a recent kit already has the holes in the web that step 4 calls out for making | * Step 4: Very likely that the nose rib that came with a recent kit already has the holes in the web that step 4 calls out for making | ||
[[Category:Hints]] | |||