3,763
edits
Hints for installing TS Flightline hoses: Difference between revisions
Hints for installing TS Flightline hoses (view source)
Revision as of 17:53, 9 September 2023
, 9 September 2023no edit summary
mNo edit summary |
mNo edit summary |
||
| Line 5: | Line 5: | ||
* Each hose has a tag crimped on with VERY sharp edges where they cut the tab off. Consider using a glue gun and adding hot glue to the tabs so you don't cut yourself handling the hoses during install. Make sure the tags are not near anything they can touch later during flight and cut into. | * Each hose has a tag crimped on with VERY sharp edges where they cut the tab off. Consider using a glue gun and adding hot glue to the tabs so you don't cut yourself handling the hoses during install. Make sure the tags are not near anything they can touch later during flight and cut into. | ||
* The tags have a hose number stamped onto it, e.g. "H9" (Hose 9). The kit contains a small paper sheet that lists the function of each hose number. | * The tags have a hose number stamped onto it, e.g. "H9" (Hose 9). The kit contains a small paper sheet that lists the function of each hose number. | ||
* If you have the setup for SDS fuel pumps, consider not running the hose from the fuel valve to the pumps in a straight line.<br>[[File:2023-09-04 14-32-38.jpg|467x467px]] | * If you have the setup for SDS fuel pumps, consider not running the hose from the fuel valve to the pumps in a straight line. The hose is very short and stiff and has no way to shrink / stretch if there is no bend in it.<br>[[File:2023-09-04 14-32-38.jpg|467x467px]] | ||
==== Brake Lines ==== | ==== Brake Lines ==== | ||