3,777
edits
Aerosport Hints: Difference between revisions
Jump to navigation
Jump to search
m
→Armrest with Throttle Quadrant
| Line 37: | Line 37: | ||
*** Add a 1/4 inch of reserve to the measurement and add it to the first marked position where the extension came out of the cover and trim the extension. | *** Add a 1/4 inch of reserve to the measurement and add it to the first marked position where the extension came out of the cover and trim the extension. | ||
*** Assemble everything, find the sweet spot for the extension to not be under tension and mark the armrest mounting holes using a hole finder. Check the length of the extension. It should have a tiny bit of slack up and down. Trim it a bit if under tension.<br>[[File:2023-07-15 19-58-09.jpg|400x400px]]<br>Test fit the placement with the extension in place. | *** Assemble everything, find the sweet spot for the extension to not be under tension and mark the armrest mounting holes using a hole finder. Check the length of the extension. It should have a tiny bit of slack up and down. Trim it a bit if under tension.<br>[[File:2023-07-15 19-58-09.jpg|400x400px]]<br>Test fit the placement with the extension in place. | ||
***Drill a 7/64 hole for the slotted spring pin through the valve end of the extension using the two holes of the valve fitting as a guide. Insert the pin with a hammer to secure the extension to the valve. | |||