25
edits
SECTION 10: TAILCONE: Difference between revisions
Jump to navigation
Jump to search
→Hints
(→Hints) |
(→Hints) |
||
| Line 15: | Line 15: | ||
** Complete section 10 up to page 10-21 step 4. Do not rivet the Aft Deck assembly (F-1014) or the Top Skin (F-1075) until you are happy with the wiring. | ** Complete section 10 up to page 10-21 step 4. Do not rivet the Aft Deck assembly (F-1014) or the Top Skin (F-1075) until you are happy with the wiring. | ||
** If you don't have the fuselage kit yet, you can purchase the rudder cables (F-1053) from Vans for about $110, then later have them deleted from the fuselage kit. | ** If you don't have the fuselage kit yet, you can purchase the rudder cables (F-1053) from Vans for about $110, then later have them deleted from the fuselage kit. | ||
**Follow the instructions in section 38 (page 38-8) on how to install the rudder cables. Install the cables through F-1007, and coil them for later between F-1006 & F-1007. | |||
** You will need to wire three (or more) systems: | ** You will need to wire three (or more) systems: | ||
*** The tail light -- refer to OP-56 for instructions on how to route the wire to the rudder. | *** The tail light -- refer to OP-56 for instructions on how to route the wire to the rudder. | ||