3,777
edits
Aerosport Hints: Difference between revisions
Jump to navigation
Jump to search
m
→Armrest with Throttle Quadrant
| Line 23: | Line 23: | ||
*** Clamp the doubler below the Vans fuel valve bracket with the center hole aligned (later to be mounted on top of the bracket). | *** Clamp the doubler below the Vans fuel valve bracket with the center hole aligned (later to be mounted on top of the bracket). | ||
*** Pick 6 outer locations and drill #30 holes with good edge distance for 1/8th rivets to secure the doubler to the Van's bracket.<br>[[File:2023-07-15 19-03-28.jpg|300px]]<br>[[File:Screen Shot 2023-07-18 at 6.44.55 AM.png|200px]] | *** Pick 6 outer locations and drill #30 holes with good edge distance for 1/8th rivets to secure the doubler to the Van's bracket.<br>[[File:2023-07-15 19-03-28.jpg|300px]]<br>[[File:Screen Shot 2023-07-18 at 6.44.55 AM.png|200px]] | ||
*** Trim the Van's fuel valve bracket so the Andair valve fits onto the doubler. | *** Trim the Van's fuel valve bracket so the Andair valve fits onto the doubler. Note that the tunnel walls may shift inwards without the bracket in place. You might have to spread them a bit to cleco your doubler plate in place lateron. | ||
*** Change the order and put the doubler on top of the Van's bracket and check clearance to the Andair valve. | *** Change the order and put the doubler on top of the Van's bracket and check clearance to the Andair valve. | ||
*** Mount the valve and insert the extension tube | *** Mount the valve and insert the extension tube | ||