3,777
edits
Aerosport Hints: Difference between revisions
m
→Hints for installing Aerosport Interior Products
| Line 18: | Line 18: | ||
*** Make a roughly 2.5 x 4.5 inch doubler for the Andair fuel valve from 64 to 80/1000 inch thick aluminum. | *** Make a roughly 2.5 x 4.5 inch doubler for the Andair fuel valve from 64 to 80/1000 inch thick aluminum. | ||
*** Put a 30-31 mm hole in the middle. | *** Put a 30-31 mm hole in the middle. | ||
*** Clamp the doubler below the Vans fuel valve bracket with the center hole aligned. | *** Clamp the doubler below the Vans fuel valve bracket with the center hole aligned (later to be mounted on top of the bracket). | ||
*** Pick 6 locations and drill #30 holes with good edge distance for 1/8th rivets to secure the doubler to the Van's bracket. | *** Pick 6 outer locations and drill #30 holes with good edge distance for 1/8th rivets to secure the doubler to the Van's bracket.<br>[[File:2023-07-15 19-03-28.jpg|300px]] | ||
*** Trim the Van's fuel valve bracket so the Andair valve fits onto the doubler. | |||
*** Change the order and put the doubler on top of the Van's bracket and check clearance to the Andair valve. | |||
*** Mount the valve and insert the extension tube | |||
*** Upsize the fuel valve hole in the tunnel cover so the extension fits easily through it. | |||
*** Secure the tunnel cover to the tunnel. | |||