3,777
edits
SDS hints: Difference between revisions
Jump to navigation
Jump to search
m
→Hints
m (→Hints) |
m (→Hints) |
||
| Line 11: | Line 11: | ||
Non binding, use the SDS installation instructions for reference! | Non binding, use the SDS installation instructions for reference! | ||
* The proper and careful installation of the silver fuel injector adapter into the cylinder head is important. Follow the most recent SDS instructions. Use only the referenced high temperature blue Loctite 246. Hand tight, then 1 1/2 turns. There are older instructions out there that reference 60 inch pounds torque which is no longer a desired tightening method and may not be enough to hold the adapters in. | * The proper and careful installation of the silver fuel injector adapter into the cylinder head is important. Follow the most recent SDS instructions. Use only the referenced high temperature blue Loctite 246. Hand tight, then 1 1/2 turns. There are older instructions out there that reference 60 inch pounds torque which is no longer a desired tightening method and may not be enough to hold the adapters in. | ||
* It is important to properly ground the ECUs as the injector return current will flow through it. At high rpm, voltage drop across the ground wiring can cause improper injector operation | * It is important to properly ground the ECUs as the injector return current will flow through it. At high rpm, a voltage drop across the ground wiring can cause improper injector operation which may lead to individual hot cylinders. | ||