Airflow Systems: Difference between revisions

Airflow Systems (view source)

Revision as of 17:37, 22 January 2023

179 bytes added , 22 January 2023

m

→‎Hose Routing

VisualWikitext

Martin

3,777

edits

@@ Line 66: / Line 66: @@
 ** [https://www.mcmaster.com/catalog/5269T19 McMaster Part No 5269T19, Snap Bushings for 3/4 inch hose] or<br>[https://www.mcmaster.com/catalog/5269T107 McMaster Part No 5269T107, Snap Bushing for 3/4 inch hose, one size up and split]
 ** [https://www.amazon.com/gp/product/B01LP4F0EU Snap Bushings for 11/16 inch hose at Amazon] or<br>[https://www.mcmaster.com/catalog/5269T106 McMaster Part No 5269T106, Snap Bushing for 11/16 hose, one size up and split]
-* When picking a spot on the firewall for mounting the fittings, be sure that the engine mount doesn't interfere with the fitting / hose. The bulkhead fitting plus the hose fitting add to quite some length before making a turn. If you need less space, consider using a 90 degree hose fitting with integrated bulkhead mount, e.g. for the #10 hose, part SR1723 from [https://www.acparts.com/product/90-degree-male-insert-o-ring-mio-bulkhead-10-1341047/ AC Parts].
+* When picking a spot on the firewall for mounting the fittings, be sure that the engine mount doesn't interfere with the fitting / hose. The bulkhead fitting plus the hose fitting add to quite some length before making a turn. If you need less space, consider using a 90 degree hose fitting with integrated bulkhead mount, e.g. for the #10 hose, part SR1723 from [https://www.acparts.com/product/90-degree-male-insert-o-ring-mio-bulkhead-10-1341047/ AC Parts]. If you buy fittings, they must be "reduced barrier" (thinner walls / smaller OD) and the o-ring type. They should be aluminum to be light but bulkhead fittings are usually steel.
 ===== Crimping Fittings to the Hoses =====