3,777
edits
Airflow Systems: Difference between revisions
Jump to navigation
Jump to search
m
→Hose Routing
mNo edit summary |
m (→Hose Routing) |
||
| Line 40: | Line 40: | ||
===== Hose Routing ===== | ===== Hose Routing ===== | ||
*Three hose diameters are in play which reflect the state of the coolant: | *Three hose diameters are in play which reflect the state of the coolant: | ||
**#10, the thickest, for when the coolant is all gas at low pressure as it comes out of the evaporator back to the compressor up front | ** #10, the thickest, for when the coolant is all gas at low pressure as it comes cold out of the evaporator back to the compressor up front | ||
**#8, mid sized, for when the coolant is compressed out of the compressor | ** #8, mid sized, for when the coolant is compressed, hot gas out of the compressor to the condenser/scoop | ||
**#6, the smallest, for when the coolant is mostly liquid out of the condenser/scoop to the evaporator via the dryer | ** #6, the smallest, for when the coolant is mostly liquid out of the condenser/scoop to the evaporator via the dryer | ||
*If you want to route the hoses along the right side of the fuse, the thicker fitting needs to be on the copilot side (the Layout diagram shows it the opposite way). | *If you want to route the hoses along the right side of the fuse, the thicker fitting needs to be on the copilot side (the Layout diagram shows it the opposite way). | ||
* There are two options for routing the hoses: through the tunnel or within the side walls. The kit contains only the fittings for the tunnel option (which needs "Z" adapters for the condenser; for routing in the side walls, you need plain 90 degree adapters on the condenser). Specify which routing you want when ordering. Airflow will exchange the Z fittings for 90 degree ones on request however they are made to order and it takes several weeks. | * There are two options for routing the hoses: through the tunnel or within the side walls. The kit contains only the fittings for the tunnel option (which needs "Z" adapters for the condenser; for routing in the side walls, you need plain 90 degree adapters on the condenser). Specify which routing you want when ordering. Airflow will exchange the Z fittings for 90 degree ones on request however they are made to order and it takes several weeks. | ||