20
edits
SECTION 10: TAILCONE: Difference between revisions
m
Added another marking technique to 10-5 Step 4
m (→Page 10-2) |
m (Added another marking technique to 10-5 Step 4) |
||
| Line 33: | Line 33: | ||
== Page 10-5 == | == Page 10-5 == | ||
* Step 4 - Consider making a jig to make drawing the center line more consistent and efficient. YouTube video: https://youtu.be/yC1kzDO_Gg8?t=590 | * Step 4 - Consider making a jig to make drawing the center line more consistent and efficient. YouTube video: https://youtu.be/yC1kzDO_Gg8?t=590 | ||
* [[File:SharpieGuide1.jpg|thumb|Carpenters Scribe Modified for sharpie]]Step 4 Carpenters Scribe modified for a sharpie. Drill 3/8 hole in end. Keep it parallel. Works great easy to make. See image: | |||
* When cutting the stiffeners to length, consider making them slightly longer than Vans recommends in the instructions by approx 1/8 inch. If cut too short, you may end up with edge distance issues when match drilling the end rivet holes. The length can then be adjusted if desired after first fit up. | * When cutting the stiffeners to length, consider making them slightly longer than Vans recommends in the instructions by approx 1/8 inch. If cut too short, you may end up with edge distance issues when match drilling the end rivet holes. The length can then be adjusted if desired after first fit up. | ||