3,777
edits
Airflow Systems: Difference between revisions
m
no edit summary
m (→Hints) |
mNo edit summary |
||
| Line 34: | Line 34: | ||
*One needs a 2.5 inch hole saw to drill the hole for the dryer. Missing in the list of tools needed for installation. | *One needs a 2.5 inch hole saw to drill the hole for the dryer. Missing in the list of tools needed for installation. | ||
*The manual shows a 90 degree fitting for the dryer with service port however the kit contains a 90 degree fitting without a port and a straight hose coupling with port. None of the drawings or pictures show this new variation. See also this [https://www.facebook.com/groups/249625742733962/posts/692509681778897 FB thread]. The kit now assumes, you mount the new inline service port at the front edge of the shelf wherever convenient. | *The manual shows a 90 degree fitting for the dryer with service port however the kit contains a 90 degree fitting without a port and a straight hose coupling with port. None of the drawings or pictures show this new variation. See also this [https://www.facebook.com/groups/249625742733962/posts/692509681778897 FB thread]. The kit now assumes, you mount the new inline service port at the front edge of the shelf wherever convenient. | ||
* The manual says nothing about doublers for the condenser holes, but the kit includes doublers. The holes in the doublers are a bit too small, the 90 degree fittings won't pass through. The doublers can be riveted to the inside of the bottom skin using 4 AN470 4-4 rivets. | * The manual says nothing about doublers for the condenser holes, but the kit includes doublers. The holes in the doublers are a bit too small, the 90 degree fittings won't pass through. The doublers can be riveted to the inside of the bottom skin using 4 AN470 4-4 rivets. [[File:2022-10-29 18-38-22.jpg|400x400px]] | ||