4,003
edits
Airflow Systems: Difference between revisions
Jump to navigation
Jump to search
m
no edit summary
mNo edit summary |
mNo edit summary |
||
| Line 11: | Line 11: | ||
* The kit has only one washer per bolt to attach the evaporator shelf to the side braces. Better to use a washer on the top and bottom to distribute forces across the soft fiberglass | * The kit has only one washer per bolt to attach the evaporator shelf to the side braces. Better to use a washer on the top and bottom to distribute forces across the soft fiberglass | ||
* You need special oil to lubricate the o-rings before assembly, e.g. [https://www.amazon.com/dp/B008PKVO66 at Amazon]. | * You need special oil to lubricate the o-rings before assembly, e.g. [https://www.amazon.com/dp/B008PKVO66 at Amazon]. | ||
* You need a nutsert tool to place the nuts into the bottom skin, e.g. [https://www.pegasusautoracing.com/productdetails.asp?RecID=9698 this tool] with this adapter [https://www.aircraftspruce.com/catalog/pnpages/04-01427.php 8-32] | * You need a nutsert tool to place the nuts into the bottom skin, e.g. [https://www.pegasusautoracing.com/productdetails.asp?RecID=9698 this tool] with this adapter [https://www.aircraftspruce.com/catalog/pnpages/04-01427.php 8-32].<br>If you have a hydraulic knockout punch tool [https://www.amazon.com/gp/product/B07RT8RKQL e.g. this one from Amazon], you can make an adapter for pulling rivnuts by taking a 2 inch piece of a 3/4 steel rod, cutting a 3/4-16 male thread onto one end and an 8-32 female thread onto the other. Use several strong fender washers and two small washers to support the nutsert towards the punch tool. | ||