3,763
edits
SECTION 30: STEP INSTALLATION: Difference between revisions
Jump to navigation
Jump to search
m
→30-3 Step 3
m (→Hints) |
m (→30-3 Step 3) |
||
| Line 5: | Line 5: | ||
=== Hints === | === Hints === | ||
* Consider installing and using a pair of "step bushings" (https://www.tcwtech.com/product/rv-10-products/) in your RV-10 steps. Without them, it is likely that over time the bolt holding your step in place will wear the opening slightly larger, and you'll have some movement/play in your step.<br>The instructions say to use a nylon string but something more sturdy is necessary should you need to pull the bushing back.<br>The bushings may require to be buffed to reduce their diameter to fit into the steps.<br>Make sure the holes and the opening of the step opening are properly deburred before inserting the bushing.<br>[[File:2022-06-26 13-22-33.jpg|400px]] | * Consider installing and using a pair of "step bushings" (https://www.tcwtech.com/product/rv-10-products/) in your RV-10 steps. Without them, it is likely that over time the bolt holding your step in place will wear the opening slightly larger, and you'll have some movement/play in your step.<br>The instructions say to use a nylon string but something more sturdy is necessary should you need to pull the bushing back.<br>The bushings may require to be buffed to reduce their diameter to fit into the steps.<br>Make sure the holes and the opening of the step opening are properly deburred before inserting the bushing.<br>[[File:2022-06-26 13-22-33.jpg|400px]] | ||
==== 30-3 Step 3 ==== | ===== Page 30-3 Step 3 ===== | ||
* Consider installing [https://www.airward.com/collections/airward-vans-rv10-kits/products/airward-vans-rv-10-baggage-compartment-access-cover-kit access covers] to be able to reach the step bolts later. This requires drilling the step bolt holes at a 45 degrees angle, so the bolts can come out without touching the baggage floor. | * Consider installing [https://www.airward.com/collections/airward-vans-rv10-kits/products/airward-vans-rv-10-baggage-compartment-access-cover-kit access covers] to be able to reach the step bolts later. This requires drilling the step bolt holes at a 45 degrees angle, so the bolts can come out without touching the baggage floor. | ||