SECTION 15: REAR SPAR

From RV10 Community Wiki
Jump to navigation Jump to search

Build Instruction Updates

Check for more recent updates here

Videos

Page 15-2

(FB 3/20/2022) Aileron bracket errors[Ed: this page isn't very useful, as you have to be a member and logged into Facebook to see it)
YES, all the FB links assume you are a member of the two RV-10 groups: RV-10 (4,700 members) and Van's RV-10 (420 members).

Page 15-3

  • Step 3: You are asked to draw a single line along the sloped edge of W-1013D-L/R. You ignore the top horizontal edge of W-1013D-L/R. So W-1013F-L/R will only have a corner trimmed off, you are not shortening the angle in height. See also this FB thread.

Page 15-5

  • Step 1: Match-drilling 4 of the W-1007B holes on the fork's arms create new holes in the flanges of the W-1010-L/R ribs as they don't align with the existing holes in the rib flanges


  • Read through the Service Bulletin SB-16-03-28 to better understand the assembly (ignore the drill-out instructions).
  • See also FB post 6/9/2022
Retrieved from "https://rv10.org/index.php?title=SECTION_15:_REAR_SPAR&oldid=3069"