SECTION 45: CABIN DOORS & TRANSPARENCIES

Check for more recent updates here

General

A group of builders are working on a hinge cover, see OnShape CAD project, check fit using this 1:1 print pdf file
The plans provide instructions for fitting the hinges to the LHS door, and Step 3 provides the positions for the WD-1019-L and WD-1019-R hinges. The plans then instruct the builder to 'repeat this step for the right side door hinges'. Note: the WD-1019-L hinge must be placed Forward side, and the WD-1019-R hinge must be placed Aft side of the doors, not Left and Right as the part naming would suggest.

See also section 4:

Silpruf Method
Silpruf @ Amazon
5-part instructional video
See also this Glastar article.
This method requires drilling holes along the edges of the windows. If your inside is in a finished state, this will cause patching / touch-ups after the window installation.
The video recommends 6 inch sanding discs which aren't readily available. 4 1/2” flap sander disks from Harbor Freight work as well.
Sikaflex instructions
A good read on window attachment is this VAF thread
June 2023 FB thread
Be diligent with the window attachment, this VAF thread talks about a window which popped out during flight: this happens
Feb 2024 FB thread