212
edits
SECTION 46: ENGINE MOUNT & LANDING GEAR: Difference between revisions
SECTION 46: ENGINE MOUNT & LANDING GEAR (view source)
Revision as of 18:31, 17 November 2025
, 17 November→Before You Start
| Line 10: | Line 10: | ||
* You *might* need a 3/8" reamer for the nose wheel axle | * You *might* need a 3/8" reamer for the nose wheel axle | ||
* Some people consider lock nuts to be one-time use so consider using other hardware to test-fit and/or ordering some extra lock nuts especially if you have to re-work anything as you go (MS21045-6, AN365-428, AN365-524, etc). | * Some people consider lock nuts to be one-time use so consider using other hardware to test-fit and/or ordering some extra lock nuts especially if you have to re-work anything as you go (MS21045-6, AN365-428, AN365-524, etc). | ||
* If you have Beringer main wheels, the cotter pins can be difficult to find. Consider using a similar part during build if not for permanent attachment. You'll find that AN381-4-40 / MS24665-379 will fit just fine. | |||
Modifications to Consider | Modifications to Consider | ||