SECTION 45: CABIN DOORS & TRANSPARENCIES

Build Instruction Updates

• 01/14/05 45_10.pdf

45-06

• A group of builders are working on a hinge cover, see OnShape CAD project, check fit using this 1:1 print pdf file

45-08

• Silpruf Method
  5-part instructional video
  This method requires drilling holes along the edges of the windows. If your inside is in a finished state, this will cause patching / touch-ups after the window installation.
  The video recommends 6 inch sanding discs which aren't readily available. 4 1/2” flap sander disks from Harbor Freight work as well.

45-19

• Windscreen base fairing lay-up
  Windshield_to_Fuse_Transition_Steps.pdf