SECTION 12: EMPENNAGE FAIRINGS: Difference between revisions
Jump to navigation
Jump to search
| Line 3: | Line 3: | ||
== Page 12-3 == | == Page 12-3 == | ||
* It is possible to 3D-print a mold and lay up a fiberglass cap that goes onto the leading edge of E-912 instead of building it up to match the curvature of E-913. The 3D-print project is here [https://cad.onshape.com/documents/2d18e62c34f9871d62d595bd/w/62ed52794e9db993635c4b5a/e/878ad7f4480a4767bfe7c195?renderMode=0&uiState=6243a8118871e6462234511d at Onshape]. The 3D-printer file is here [[ | * It is possible to 3D-print a mold and lay up a fiberglass cap that goes onto the leading edge of E-912 instead of building it up to match the curvature of E-913. The 3D-print project is here [https://cad.onshape.com/documents/2d18e62c34f9871d62d595bd/w/62ed52794e9db993635c4b5a/e/878ad7f4480a4767bfe7c195?renderMode=0&uiState=6243a8118871e6462234511d at Onshape]. The 3D-printer file is here [[File:HS_Fairing_Mold1.stl|HS_Fairing_Mold1.stl]]. | ||
* It is possible to 3D-print a mold and lay up a fiberglass insert that goes into HS-910. It has the right curvature and it has the necessary kink to match the Elevator counter weight leading edge. The 3D-print project is here [https://cad.onshape.com/documents/fcd78f2ce5fcf8549652b724/w/efce270e7d34aa85633c27ce/e/b25eb27fde3cd5777347d51f?renderMode=0&uiState=6243a8b37aa9182ef0561832 at Onshape]. The 3D-printer file is here [[Media:HS_Fairing_Mold2.stl|HS_Fairing_Mold2.stl]] | * It is possible to 3D-print a mold and lay up a fiberglass insert that goes into HS-910. It has the right curvature and it has the necessary kink to match the Elevator counter weight leading edge. The 3D-print project is here [https://cad.onshape.com/documents/fcd78f2ce5fcf8549652b724/w/efce270e7d34aa85633c27ce/e/b25eb27fde3cd5777347d51f?renderMode=0&uiState=6243a8b37aa9182ef0561832 at Onshape]. The 3D-printer file is here [[Media:HS_Fairing_Mold2.stl|HS_Fairing_Mold2.stl]] | ||
Revision as of 14:52, 30 March 2022
Page 12-2
- Step 1: Good results were achieved by clamping an aluminum strip along the recess edge and then using a Dremel with router attachment to square the edge. Even though the Dremel has the potential to eat into the aluminum strip, one can guide the Dremel in a fashion where it barely touches the strip.
Page 12-3
- It is possible to 3D-print a mold and lay up a fiberglass cap that goes onto the leading edge of E-912 instead of building it up to match the curvature of E-913. The 3D-print project is here at Onshape. The 3D-printer file is here File:HS Fairing Mold1.stl.
- It is possible to 3D-print a mold and lay up a fiberglass insert that goes into HS-910. It has the right curvature and it has the necessary kink to match the Elevator counter weight leading edge. The 3D-print project is here at Onshape. The 3D-printer file is here HS_Fairing_Mold2.stl