SECTION 45: CABIN DOORS & TRANSPARENCIES

Build Instruction Updates

• 03/10/05 45_10.pdf

Check for more recent updates here

General

• Door fit: See this VAF Thread
• Epoxy to use: See this FB Thread 3/2024

45-02

• The holes in the two door halves don't align, just use the ones that do align, see also this FB thread 4/2024.

45-06

• A group of builders are working on a hinge cover, see OnShape CAD project, check fit using this 1:1 print pdf file
• The plans provide instructions for fitting the hinges to the LHS door, and Step 3 provides the positions for the WD-1019-L and WD-1019-R hinges. The plans then instruct the builder to 'repeat this step for the right side door hinges'. Note: the WD-1019-L hinge must be placed Forward side, and the WD-1019-R hinge must be placed Aft side of the doors, not Left and Right as the part naming would suggest.
  
  See also section 4:
  

45-08

• Silpruf Method
  • Silpruf @ Amazon
  • 5-part instructional video
  • See also this Glastar article.
  • See also Dan H's write-up of the Silpruf Method
  • Notes
    • This method requires drilling holes along the edges of the windows. If your inside is in a finished state, this will cause patching / touch-ups after the window installation.
    • The video recommends 6 inch sanding discs which aren't readily available. 4 1/2” flap sander disks from Harbor Freight work as well.
• Sikaflex instructions
• A good read on window attachment is this VAF thread
• June 2023 FB thread
• Be diligent with the window attachment, this VAF thread talks about a window which popped out during flight: this happens
• Feb 2024 FB thread

45-19

• Windscreen base fairing lay-up
  Windshield_to_Fuse_Transition_Steps.pdf
  See also Van's video for the RV14.