SECTION 45: CABIN DOORS & TRANSPARENCIES: Difference between revisions

Revision as of 05:00, 12 June 2022

A group of builders are working on a hinge cover, see OnShape CAD project, check fit using this 1:1 print pdf file

Silpruf Method
5-part instructional video
This method requires drilling holes along the edges of the windows. If your inside is in a finished state, this will cause patching / touch-ups after the window installation.
The video recommends 6 inch sanding discs which aren't readily available. 4 1/2” flap sander disks from Harbor Freight work as well.

@@ Line 1: / Line 1: @@
+=== Build Instruction Updates ===
+* 01/14/05 [https://www.vansaircraft.com/wp-content/uploads/2005/03/45_10.pdf 45_10.pdf]
 == 45-06 ==
 * A group of builders are working on a hinge cover, see [https://cad.onshape.com/documents/84d0ba8a64dbd86d8aee8ad1/w/ed92d4e493cd33946f3013d2/e/1d170d74353b23aebd0a0215 OnShape CAD project], check fit using this 1:1 print [[Media:hinge_cover_v2.pdf | pdf file]]
 == 45-08 ==
 * Silpruf Method<br>[https://www.youtube.com/watch?v=A336SG-fsiI 5-part instructional video]<br>This method requires drilling holes along the edges of the windows. If your inside is in a finished state, this will cause patching / touch-ups after the window installation.<br>The video recommends 6 inch sanding discs which aren't readily available. 4 1/2” flap sander disks from Harbor Freight work as well.