SECTION 45: CABIN DOORS & TRANSPARENCIES: Difference between revisions
Jump to navigation
Jump to search
(→45-08) |
m (→45-08) |
||
| Line 1: | Line 1: | ||
== 45-06 == | |||
* A group of builders are working on a hinge cover, see [https://cad.onshape.com/documents/84d0ba8a64dbd86d8aee8ad1/w/ed92d4e493cd33946f3013d2/e/1d170d74353b23aebd0a0215 OnShape CAD project], check fit using this 1:1 print [[Media:hinge_cover_v2.pdf | pdf file]] | |||
== 45-08 == | == 45-08 == | ||
* Silpruf Method<br>[https://www.youtube.com/watch?v=A336SG-fsiI 5-part instructional video]<br>This method requires drilling holes along the edges of the windows. If your inside is in a finished state, this will cause patching / touch-ups after the window installation.<br>The video recommends 6 inch sanding discs which aren't readily available. 4 1/2” flap sander disks from Harbor Freight work as well. | * Silpruf Method<br>[https://www.youtube.com/watch?v=A336SG-fsiI 5-part instructional video]<br>This method requires drilling holes along the edges of the windows. If your inside is in a finished state, this will cause patching / touch-ups after the window installation.<br>The video recommends 6 inch sanding discs which aren't readily available. 4 1/2” flap sander disks from Harbor Freight work as well. | ||
Revision as of 21:33, 21 April 2022
45-06
- A group of builders are working on a hinge cover, see OnShape CAD project, check fit using this 1:1 print pdf file
45-08
- Silpruf Method
5-part instructional video
This method requires drilling holes along the edges of the windows. If your inside is in a finished state, this will cause patching / touch-ups after the window installation.
The video recommends 6 inch sanding discs which aren't readily available. 4 1/2” flap sander disks from Harbor Freight work as well.
45-19
- Windscreen base fairing lay-up
Windshield_to_Fuse_Transition_Steps.pdf