183
edits
Skybolt Hints: Difference between revisions
Jump to navigation
Jump to search
m
no edit summary
mNo edit summary |
mNo edit summary |
||
| (One intermediate revision by one other user not shown) | |||
| Line 1: | Line 1: | ||
* [https://skybolt.com/wp-content/uploads/2021/05/Vans-RV-Cowling-Installation-2017-Rev-22-9-13-2017.pdf Skybolt installation instructions for Vans airplanes] | * [https://skybolt.com/wp-content/uploads/2021/05/Vans-RV-Cowling-Installation-2017-Rev-22-9-13-2017.pdf Skybolt installation instructions for Vans airplanes] | ||
* Use the 3 1/2” or smaller spacing. If you use longer spacing you risk the cowl ballooning between them. | * Use the 3 1/2” or smaller spacing. If you use longer spacing you risk the cowl ballooning between them. | ||
* Beware of the skybolt receptacles in the corners by the engine mounts; if you do not lay them out before hand, the mounts will interfere with those receptacles. | * Consider countersinking the two rivet holes for each skybolt socket on each bracket before installing the brackets on the aircraft. Caution: there is a right and wrong side to countersink; be sure you countersink the outward-facing side of the brackets. | ||
* Beware of the skybolt receptacles in the corners by the engine mounts; if you do not lay them out before hand, the mounts will interfere with those receptacles. Consider doing 46-02 Step 1 (temporarily installing the engine mount) before laying out your skybolt brackets. Then, do 46-02 Step 2 (removing the engine mount) to make it easier to rivet the skybolt brackets. | |||
* The skybolt flanges are wider than the stock hinges. For this reason, the skybolt flanges might interfere with the thicker portion of the cowling. Consider removing cowl material to make each flange fit and reinforce the area with a piece of fiberglass. See also this [https://www.facebook.com/groups/vansrv10/posts/9827285024059175 FB Thread] (6/2025) | * The skybolt flanges are wider than the stock hinges. For this reason, the skybolt flanges might interfere with the thicker portion of the cowling. Consider removing cowl material to make each flange fit and reinforce the area with a piece of fiberglass. See also this [https://www.facebook.com/groups/vansrv10/posts/9827285024059175 FB Thread] (6/2025) | ||
* Check out Andrew Gilroy's video series on mounting his RV-14 cowl [https://www.youtube.com/watch?v=oKDXR3u5XBA YouTube] | * Check out Andrew Gilroy's video series on mounting his RV-14 cowl [https://www.youtube.com/watch?v=oKDXR3u5XBA YouTube] | ||
* See Baseleg Aviation's [https://www.youtube.com/watch?v=x1RXXqysP-A YouTube] video. | * See Baseleg Aviation's [https://www.youtube.com/watch?v=x1RXXqysP-A YouTube] video. | ||
* See this [https://www.facebook.com/groups/vansrv10/posts/2172948202826267 FB Thread] (5/2019) | * See also this [https://www.facebook.com/groups/vansrv10/posts/2172948202826267 FB Thread] (5/2019) | ||
* See also this [https://www.facebook.com/groups/vansrv10/posts/9833204570133887 FB Trhead] (6/2025) | |||
* See also this [https://www.facebook.com/groups/vansrv10/posts/9827285024059175 FB Trhead] (6/2025) | |||
* See also this [https://www.facebook.com/groups/vansrv10/posts/9819356954851982 FB Trhead] (6/2025) | |||
[[Category:Optional]] | [[Category:Optional]] | ||