186
edits
SECTION 45: CABIN DOORS & TRANSPARENCIES: Difference between revisions
SECTION 45: CABIN DOORS & TRANSPARENCIES (view source)
Revision as of 14:54, 29 August 2025
, 29 August→Before You Start
| (2 intermediate revisions by the same user not shown) | |||
| Line 7: | Line 7: | ||
Special/New Tools/Supplies | Special/New Tools/Supplies | ||
* See [[Window Care]] for tips and tricks on taking care of your Plexiglass windows | |||
* Consider an angle grinder with stone wheel if you are going to be using McMaster seals on your doors. There is a lot of fiberglass to remove. | * Consider an angle grinder with stone wheel if you are going to be using McMaster seals on your doors. There is a lot of fiberglass to remove. | ||
* Safety wire and safety wire pliers if you don't already have them. | * Safety wire and safety wire pliers if you don't already have them. | ||
* Small syringes ([https://www.amazon.com/dp/B0DF2DVGDX like these]) to insert epoxy into any missing areas after binding the doors together | * Small syringes ([https://www.amazon.com/dp/B0DF2DVGDX like these]) to insert epoxy into any missing areas after binding the doors together | ||
* Large syringes ([https://www.amazon.com/dp/B0DPKPT2JB like these]) help if you are using the McMaster seals. | * Large syringes ([https://www.amazon.com/dp/B0DPKPT2JB like these]) help if you are using the McMaster seals. | ||
* It's nice to be able to remove and re-install the protective wrap on the windows while working on them, and you probably want to end with a nice clean protective wrap as well. Consider buying a role of [https://www.amazon.com/dp/B09GWCJYTV Collision Wrap]; one roll will be plenty for several coatings of all of your transparencies. | |||
* If you are using a window install method that needs deeper window pockets, consider ordering four pieces of Polypropylene Rod, 1/4" Diameter, 8 Feet Long (McMaster part 8658K51) while ordering your door seal. You can temporarily fit these into the window openings as spacers to help build up epoxy around the windows to the proper depth as shown in this photo. See also this [https://www.facebook.com/groups/vansrv10/posts/23928075716886869 FB thread]. | * If you are using a window install method that needs deeper window pockets, consider ordering four pieces of Polypropylene Rod, 1/4" Diameter, 8 Feet Long (McMaster part 8658K51) while ordering your door seal. You can temporarily fit these into the window openings as spacers to help build up epoxy around the windows to the proper depth as shown in this photo. See also this [https://www.facebook.com/groups/vansrv10/posts/23928075716886869 FB thread]. | ||
[[File:2025-06-26 18.52.29.jpg|none|thumb|1/4" plastic spacers temporarily epoxied into window opening to make it easy to build up the epoxy around.]] | [[File:2025-06-26 18.52.29.jpg|none|thumb|1/4" plastic spacers temporarily epoxied into window opening to make it easy to build up the epoxy around.]] | ||
| Line 37: | Line 39: | ||
* Important: if you are using the Planearound 180-degree cam AND the Aerosport low-profile exterior door handles, [https://img1.wsimg.com/blobby/go/85ec6025-f02d-4bd9-b354-d9bef14e3672/downloads/e338c50b-3a76-446a-920a-64b0f7271a21/Door%20Mechanism%20Installation%20Compilation%20Docume.pdf?ver=1738948265394 this guide] will save you many hours of frustration. | * Important: if you are using the Planearound 180-degree cam AND the Aerosport low-profile exterior door handles, [https://img1.wsimg.com/blobby/go/85ec6025-f02d-4bd9-b354-d9bef14e3672/downloads/e338c50b-3a76-446a-920a-64b0f7271a21/Door%20Mechanism%20Installation%20Compilation%20Docume.pdf?ver=1738948265394 this guide] will save you many hours of frustration. | ||
* This is a [https://www.youtube.com/watch?v=FJXQlKcADOE pretty good video] showing the full door process. | * This is a [https://www.youtube.com/watch?v=FJXQlKcADOE pretty good video] showing the full door process. | ||
* If you are using both the Aerosport Low-profile exterior door handles and the Aerosport interior door handle covers, see the necessary modifications [https://vansairforce.net/threads/aerosport-door-handle-cover-issue.180680/ on this VAF post]. | * If you are using both the Aerosport Low-profile exterior door handles and the Aerosport interior door handle covers, see the necessary modifications [https://vansairforce.net/threads/aerosport-door-handle-cover-issue.180680/post-1416983 on this VAF post] -- specifically see the image on where to trim the plates. | ||
== 45-02 == | == 45-02 == | ||
| Line 113: | Line 115: | ||
== 45-16 == | == 45-16 == | ||
==== Step 1 ==== | |||
* Check the position of the strut versus the hinge. The innermost hole of the strut is about at the position where the hinge pin resides. If you mount the strut bracket too far outwards, the bracket for the strut on the door end cannot be placed above the window, it would overlap with the window. | |||
* Also be careful with the angle of the struct attach bracket, specifically how the outboard end lines up with the future position of a closed door; at least one builder had a situation where the closed door hits this strut attach bracket. | |||
* If you are getting the Aerosport overhead panel, you need to match drill the door strut attach bracket to the canopy before attaching the overhead panel. It is necessary to notch the overhead panel for the bracket. | |||
* If you are getting the after-market PlaneAround DOOR STRUT ATTACH BRACKETS, do not match drill with a #12 bit since the holes are already threaded for 10-32 bolts. Consider match drilling with a #22 bit, then enlarging the hole to size #12. You may have to chase the bracket threads with a 10-32 tap if the #22 drill bit damaged them. | |||
==== Step 3 ==== | |||
* If you are getting the after-market PlaneAround DOOR STRUT ATTACH BRACKETS, two of the four bushings need to be narrower, 3/8 inch instead of 9/16. | |||
== 45-17 == | == 45-17 == | ||